# Quick start | User Guide | Shotomatic

> Install Shotomatic, grant the permissions you need, and complete your first automated screenshot session.

- Type: Public web page
- Canonical page: [https://www.shotomatic.com/guide/get-started/quick-start](https://www.shotomatic.com/guide/get-started/quick-start)
- Markdown page: [https://www.shotomatic.com/guide/get-started/quick-start.md](https://www.shotomatic.com/guide/get-started/quick-start.md)

Browse the user guide

On this page

1.  [Download and open Shotomatic](#download-and-open-shotomatic)
2.  [Grant macOS permissions](#grant-macos-permissions)
3.  [Configure the first session](#configure-the-first-session)
4.  [Choose a capture source](#choose-a-capture-source)
5.  [Run and finish the capture](#run-and-finish-the-capture)
6.  [Review the result](#review-the-result)

Shotomatic captures a screen, app window, or selected area on a schedule. A basic session only needs a stop condition, an interval, and a capture source.

## Download and open Shotomatic

1.  Go to the [Shotomatic website](https://www.shotomatic.com/) and download the build for your computer.
2.  On a Mac, choose Apple Silicon for Macs with an M-series chip, or Intel for an Intel-based Mac. On Windows, the button gets Shotomatic from the Microsoft Store; see [Install on Windows](https://www.shotomatic.com/guide/get-started/install-on-windows).
3.  Open Shotomatic.

The first time you open Shotomatic, it asks **What do you want to capture?** Pick a starting point, or select **Skip**. A **Getting started** card then lists the steps to your first capture and outlines the control to use next; steps check off as you do them, and you can hide the card with its close button. After that, the app opens on **Auto Capture**. You can return to this screen at any time with `Command + 1` (`Ctrl + 1` on Windows).

## Grant macOS permissions

On a Mac, Shotomatic checks permissions before it starts a capture. Windows needs no permissions, so skip to the next step.

Permission

What it enables

Screen Recording

Capturing displays and app windows

Accessibility

Automatic keypresses, window focusing, and Action Capture clicks

Select **Open System Settings** beside a missing permission, enable Shotomatic in System Settings, then return to the app and select **Refresh Status**. See [macOS permissions](https://www.shotomatic.com/guide/get-started/macos-permissions) for the full recovery flow.

## Configure the first session

On **Auto Capture**, keep the first run simple:

1.  Leave **Stop condition** set to **Screenshots** and enter `3`.
2.  Leave **Interval** at `1 second`.
3.  Leave **Key press** empty.
4.  Keep the **Countdown** at `3 s` so you have time to switch to the target.

These settings produce three screenshots, one second apart. The free version captures up to 3 screenshots per run and 9 per day.

![Shotomatic Auto Capture options configured for three screenshots at a one-second interval](https://www.shotomatic.com/images/docs/guide-auto-capture-first-session-current.webp)

Use three screenshots, a one-second interval, and a short countdown for the first test.

After this test works, add `Right Arrow` to **Key press** to advance a page after each screenshot. See [How to Save Ebook Pages as a PDF on Mac](https://www.shotomatic.com/blog/save-ebook-pages-pdf-mac) for reader setup, timing, page-turn automation, and PDF export.

## Choose a capture source

Select the source button at the bottom of the setup screen. Its label reflects the current source type, such as **Select screen** or **Select window**. Choose the source that matches the task:

-   **Screens** captures one selected display for the whole session.
-   **Windows** captures one selected app window. Shotomatic brings that window forward when capture starts.

For **Screens** or **Windows**, select a thumbnail and then select **Start Capture**. Use the countdown to put the target in its intended starting state.

For a smaller part of the screen, select **Custom Area**. The picker reopens the saved area when one exists; otherwise, it starts with a centered 16:9 selection. Move or resize it, or press Escape to clear it and draw a new area. Select **Start Auto Capture** in the overlay.

Read [screens, windows, and custom areas](https://www.shotomatic.com/guide/screenshot-capture/capture-sources) for details about each source.

## Run and finish the capture

The countdown begins after you confirm the source. Shotomatic then saves frames until it reaches the stop condition.

During the run, the floating capture toolbar shows progress toward the stop condition. Use **Pause capture** to hold the session or **Finish capture** to end it immediately. Frames already captured remain available.

## Review the result

New frames appear in the screenshot panel while the session runs. When the run finishes, the panel shows **Capture complete** and the number of screenshots. Use **Select all** or the checkbox on each thumbnail to choose which frames to keep.

The frame selection applies to **ZIP**, **Images** (PNG or JPG), **PDF**, and **MP4** exports. **Create Document** uses the whole session, including frames that are not selected for export. You can also open the export folder from this panel.

Completed sessions also appear under **Capture History**, where you can reopen them later. See [Capture History](https://www.shotomatic.com/guide/sessions-and-export/previous-sessions) and [export formats](https://www.shotomatic.com/guide/sessions-and-export/export-formats) for the next steps.

## On this page

1.  [Download and open Shotomatic](#download-and-open-shotomatic)
2.  [Grant macOS permissions](#grant-macos-permissions)
3.  [Configure the first session](#configure-the-first-session)
4.  [Choose a capture source](#choose-a-capture-source)
5.  [Run and finish the capture](#run-and-finish-the-capture)
6.  [Review the result](#review-the-result)

## About this version

This Markdown page is generated from the server-rendered public page on Shotomatic. Interactive controls and site navigation are omitted. Use the canonical page when citing or sharing it with people.
